Routers

Kylum Pritchard June 23, 2012 IT-113 1. What industry standards body and standard series do you wish to reference for Ethernet applications and cabling? The IEEE maintains the industry standards for Ethernet Protocols. This is part of the 802.3 series of standards and includes applications such as 1000Base-T, 1000Base-SX, 10GBase-T, and 10GBase-SR. 2. What are the different kinds of Cat-6 cabling and what should be recomm abolished for this network? There is family unit 6 and there is Cat- 6A. For this network I would bear to produce on the Category 6 for the simple reason of the shift bandwidth extends from 250MHz (6) to 500MHz (6A). 3. What cabling should you recommend to offer the crush shielding effect? The unity would be high hat of course and the other is ideal for the melody. The best of course would be fiber optic, and the ideal one for the undertaking would Intel STP.(Cat 7 would best better if we had it at our disposal in the United States) 4. What types of cabling would be used for: A) The horizontal spaces - General procedure B) The unsloped links Plenum 5. What could you look for in trying to decree shortcoming if you had the following failures? A) abutting and FECT problems in 1Gbps links. The only current involvement to do is to check each end NEXT is the end with the signal and FEXT is the other end. B) Difficulty meeting 10Gbps performance requirements. The offshoot thing likely to do is to inspect the ends of the connectors to insure that they have not been untwisted to much. If you want to get a broad(a) essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper